We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.16
mikroSDK Library: 2.0.0.0
Category: Amplifier
Downloaded: 124 times
Not followed.
License: MIT license
AudioAmp 5 Click is a stereo audio amplifier, capable of delivering up to 10W per channel with the 8Ω load.
Do you want to subscribe in order to receive notifications regarding "AudioAmp 5 click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "AudioAmp 5 click" changes.
Do you want to report abuse regarding "AudioAmp 5 click".
| DOWNLOAD LINK | RELATED COMPILER | CONTAINS |
|---|---|---|
| 4124_audioamp_5_click.zip [539.31KB] | mikroC AI for ARM GCC for ARM Clang for ARM mikroC AI for PIC mikroC AI for PIC32 XC32 GCC for RISC-V Clang for RISC-V mikroC AI for AVR mikroC AI for dsPIC XC16 |
|
AudioAmp 5 Click is a stereo audio amplifier, capable of delivering up to 10W per channel with the 8Ω load.
AudioAmp 5 Click is a stereo audio amplifier, capable of delivering up to 10W per channel with the 8Ω load.
We provide a library for the AudioAmp5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for AudioAmp5 Click driver. The library performs the audio control of the Audio Amp 5 Click board. This library consists of the special commands for audio output control, for example to mute/turn on the outputs, to select the desired output gain or mode.
Config Object Initialization function.
void audioamp5_cfg_setup ( audioamp5_cfg_t *cfg );
Initialization function.
AUDIOAMP5_RETVAL audioamp5_init ( audioamp5_t ctx, audioamp5_cfg_t cfg );
Click Default Configuration function.
void audioamp5_default_cfg ( audioamp5_t *ctx );
Function puts a device to the desired mode.
void audioamp5_mode_select ( audioamp5_t *ctx, uint8_t state );
Function performs a desired gain selection.
void audioamp5_gain_select ( audioamp5_t *ctx, uint8_t state );
Function to update the configuration of the module.
void audioamp5_config_update ( audioamp5_t *ctx );
This example consist of sending special commands for audio output control, selecting different output modes and turning on/off the audio output.
The demo application is composed of two sections :
Initializes GPIO interface on the desired mikrobus selection, and performs a device init configuration.
void application_init ( void )
{
log_cfg_t log_cfg;
audioamp5_cfg_t cfg;
/**
* Logger initialization.
* Default baud rate: 115200
* Default log level: LOG_LEVEL_DEBUG
* @note If USB_UART_RX and USB_UART_TX
* are defined as HAL_PIN_NC, you will
* need to define them manually for log to work.
* See @b LOG_MAP_USB_UART macro definition for detailed explanation.
*/
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
audioamp5_cfg_setup( &cfg );
AUDIOAMP5_MAP_MIKROBUS( cfg, MIKROBUS_1 );
audioamp5_init( &audioamp5, &cfg );
audioamp5_default_cfg( &audioamp5 );
log_printf( &logger, "** Audio Amp 5 is initialized **\r\n" );
Delay_ms ( 500 );
}Checks the entered command and, if the command is valid, performs a device configuration which the entered command determines.
void application_task ( void )
{
// Task implementation.
audioamp5_gain_select( &audioamp5, AUDIOAMP5_GAIN_26DB );
audioamp5_config_update( &audioamp5 );
log_printf( &logger, "** Gain value is 26dB **\r\n" );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
audioamp5_gain_select( &audioamp5, AUDIOAMP5_GAIN_20DB );
audioamp5_config_update( &audioamp5 );
log_printf( &logger, "** Gain value is 20dB **\r\n" );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
}After each command for device configuration, the command for configuration updating will be executed. When BD Mode (0) is selected, the VIN supply voltage threshold is 7.5V. When Low-Idle-Current 1SPW Mode is selected, the VIN supply voltage threshold > is 3.4V.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.
We provide a library for the AudioAmp5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for AudioAmp5 Click driver. The library performs the audio control of the Audio Amp 5 Click board. This library consists of the special commands for audio output control, for example to mute/turn on the outputs, to select the desired output gain or mode.
Config Object Initialization function.
void audioamp5_cfg_setup ( audioamp5_cfg_t *cfg );
Initialization function.
AUDIOAMP5_RETVAL audioamp5_init ( audioamp5_t ctx, audioamp5_cfg_t cfg );
Click Default Configuration function.
void audioamp5_default_cfg ( audioamp5_t *ctx );
Function puts a device to the desired mode.
void audioamp5_mode_select ( audioamp5_t *ctx, uint8_t state );
Function performs a desired gain selection.
void audioamp5_gain_select ( audioamp5_t *ctx, uint8_t state );
Function to update the configuration of the module.
void audioamp5_config_update ( audioamp5_t *ctx );
This example consist of sending special commands for audio output control, selecting different output modes and turning on/off the audio output.
The demo application is composed of two sections :
Initializes GPIO interface on the desired mikrobus selection, and performs a device init configuration.
void application_init ( void )
{
log_cfg_t log_cfg;
audioamp5_cfg_t cfg;
/**
* Logger initialization.
* Default baud rate: 115200
* Default log level: LOG_LEVEL_DEBUG
* @note If USB_UART_RX and USB_UART_TX
* are defined as HAL_PIN_NC, you will
* need to define them manually for log to work.
* See @b LOG_MAP_USB_UART macro definition for detailed explanation.
*/
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
audioamp5_cfg_setup( &cfg );
AUDIOAMP5_MAP_MIKROBUS( cfg, MIKROBUS_1 );
audioamp5_init( &audioamp5, &cfg );
audioamp5_set_device_state( &audioamp5, AUDIOAMP5_PWRUP_UNMUTE_OUTPUTS );
audioamp5_default_cfg( &audioamp5 );
log_printf( &logger, "** Audio Amp 5 is initialized **\r\n" );
Delay_ms ( 500 );
}Checks the entered command and, if the command is valid, performs a device configuration which the entered command determines.
void application_task ( void )
{
// Task implementation.
audioamp5_gain_select( &audioamp5, AUDIOAMP5_GAIN_26DB );
audioamp5_config_update( &audioamp5 );
log_printf( &logger, "** Gain value is 26dB \r\n**" );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
audioamp5_gain_select( &audioamp5, AUDIOAMP5_GAIN_20DB );
audioamp5_config_update( &audioamp5 );
log_printf( &logger, "** Gain value is 20dB \r\n**" );
}After each command for device configuration, the command for configuration updating will be executed. When BD Mode (0) is selected, the VIN supply voltage threshold is 7.5V. When Low-Idle-Current 1SPW Mode is selected, the VIN supply voltage threshold > is 3.4V.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.
