TOP Contributors

  1. MIKROE (2642 codes)
  2. Alcides Ramos (348 codes)
  3. Shawon Shahryiar (307 codes)
  4. jm_palomino (112 codes)
  5. Chisanga Mumba (90 codes)
  6. S P (73 codes)
  7. dany (71 codes)
  8. MikroBUS.NET Team (35 codes)
  9. NART SCHINACKOW (34 codes)
  10. Armstrong Subero (27 codes)

Most Downloaded

  1. Timer Calculator (136227 times)
  2. FAT32 Library (69498 times)
  3. Network Ethernet Library (55712 times)
  4. USB Device Library (45997 times)
  5. Network WiFi Library (41640 times)
  6. FT800 Library (40804 times)
  7. GSM click (28789 times)
  8. PID Library (26333 times)
  9. mikroSDK (26061 times)
  10. microSD click (25148 times)
Libstock prefers package manager

Package Manager

We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]

< Back
mikroSDK Library

RTC 4 click

Rating:

5

Author: MIKROE

Last Updated: 2019-03-20

Package Version: 1.0.0.1

mikroSDK Library: 1.0.0.0

Category: RTC

Downloaded: 3896 times

Followed by: 1 user

License: MIT license  

RTC4 click has an integrated backup energy source that maintains a charge with an onboard coin cell supercapacitor. Being a 1-Wire click board, RTC4 click can operate in a microLAN network (a network of 1-Wire devices that are all associated with a master device).

No Abuse Reported

Do you want to subscribe in order to receive notifications regarding "RTC 4 click" changes.

Do you want to unsubscribe in order to stop receiving notifications regarding "RTC 4 click" changes.

Do you want to report abuse regarding "RTC 4 click".

  • mikroSDK Library 2.0.0.0
  • Comments (1)
DOWNLOAD LINK RELATED COMPILER CONTAINS
mikroBasic PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc

mikroSDK Library Blog

RTC4 Click Board

RTC4 Click Board

Front and back view of the RTC4 Click board designed in mikroBUS form factor.

View full image

Library Description

The library covers all the necessary functions to control the RTC 4 click board. Library performs the communication with the device via 1-Wire protocol by writing to registers and by reading from registers. A library has the function for reading sensor registration number: family code, serial number & CRC tester data, for a set and get Unix time data and for convert Unix time and date to human-readable format.

Key functions:

  • uint8_t rtc4_getInterrupt() - Get state of interrupt pin function.

Examples description

The application is composed of three sections:

  • System Initialization - Initializes GPIO and LOG structures set INT pin as input and start to write log.
  • Application Initialization -  Initialization driver enables - GPIO, start One Wire communication and set Unix time data.
  • Application Task - (code snippet) This is an example which demonstrates the use of RTC 4 click board. RTC 4 click communicates with register via One Wire by the write to register and read from the register, display RTC time and date which we received reading from the DS2471 chip. Results are being sent to the Usart Terminal where you can track their changes. All data logs write on USB uart changes for every 1 sec.
void applicationTask() 
{
    rtc4_getUnixTime();
    rtc4_convertDateTime();
    
    if ( timeSecondsNew != timeSeconds )
    {
        mikrobus_logWrite( " Time: ", _LOG_TEXT );
        rtc4_displayLogUart( timeHours );
        mikrobus_logWrite( ":", _LOG_TEXT );
        rtc4_displayLogUart( timeMinutes );
        mikrobus_logWrite( ":", _LOG_TEXT );
        rtc4_displayLogUart( timeSeconds );
        mikrobus_logWrite( "", _LOG_LINE );

        mikrobus_logWrite( " Date: ", _LOG_TEXT );
        rtc4_displayLogUart( dateDay );
        mikrobus_logWrite( ".", _LOG_TEXT );
        rtc4_displayLogUart( dateMonth );
        mikrobus_logWrite( ".", _LOG_TEXT );
        mikrobus_logWrite( "20", _LOG_TEXT );
        rtc4_displayLogUart( dateYear );
        mikrobus_logWrite( ".", _LOG_LINE );​

        mikrobus_logWrite( "-------------------", _LOG_LINE );
        timeSecondsNew = timeSeconds;​
    }
}    

Additional Functions :

  • void displayLogUart( uint8_t value ) - Write the value of time or date as a two-digit number.
  • void rtc4_start() - Start RTC 4 click.
  • void rtc4_getSensorInfo() - Read sensor registration number: family code, serial number & CRC tester data.
  • void rtc4_getUnixTime() - Get Unix time data.
  • void rtc4_setUnixTime( uint32_t unixTime ) - Set Unix data.
  • void rtc4_convertDateTime() - Convert Unix time & date to human readable format.

Other mikroE Libraries used in the example:

  • One_Wire
  • UART​
  • Conversion

Additional notes and informations

Depending on the development board you are using, you may need USB UART clickUSB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message

ALSO FROM THIS AUTHOR

I2C MUX 6 click

0

I2C MUX 6 Click is a compact add-on board representing a bidirectional selector dedicated to I2C slave address conflicts applications. This board features the PCA9518, an expandable five-channel bidirectional buffer controlled by the I2C-bus from Texas Instruments. The PCA9518 overcomes the restriction of maximum bus capacitance by separating and buffering the I2C data (SDA) and clock (SCL) lines into multiple groups of 400pF I2C channels. It provides activation of the desired channel via a given Enable pin and permits extension of the I2C-bus, through an onboard expansion header, by buffering both the data (SDA) and the clock (SCL) lines enabling virtually an unlimited number of buses of 400pF.

[Learn More]

DMA Library

6

DMA is a powerful module that can autonomosly transfer data from memory to memory, memory to peripheral and peripheral to memory thus freeing up processor to do other tasks. This library provides routines for working with DMA module. A special thank you goes out to our valued associate Milos Markovic who helped in creating this package.

[Learn More]

3D Hall 7 click

5

3D HALL 7 click is a very accurate, magnetic field sensing Click board, used to measure the intensity of the magnetic field across three perpendicular axes.

[Learn More]