Version 1.0 Alpha - Dec 3, 2012
This is a simple example that shows a stereo image on a pair of mikromedia PIC32 boards. If you tap the displays you can switch between parallel vs crosseyed views. The included stereo 3D image is of a carved piece of scrimshaw.
The demo was designed to work with either cross-eyed free viewing techniques or parallel viewing techniques with a set of parallel stereo 3D glasses Loreo Lite 3D viewer.
The code was written using mikroC PRO for PIC32, mikroC PRO for dsPIC, and VisualTFT.
Install the HEX Firmware
If you have a PIC32 Mikromedia board flash the firmware file PIC32_Stereo3D.hex to a pair of Mikromedia PIC32 boards.
If you have a dsPIC33 Mikromedia board flash the firmware file dsPIC33_Stereo3D.hex to a pair of Mikromedia PIC32 boards.
Copy the VisualTFT .res resource file to the microSD card in each of the two Mikromedia boards.
Get ready to try out the stereo pair image viewer. Tap the mikromedia display to switch between the right or left stereo pair image views.
MikroMMB for PIC32 or MikroMMB for dsPIC33
Created by Andrew Hazelden. (c) copyright 2012.
Email: andrewhazelden@gmail.com