We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-05-10
Package Version: 2.1.0.1
mikroSDK Library: 2.0.0.0
Category: 1-Wire
Downloaded: 8 times
Not followed.
License: MIT license
Download [418.25KB]I2C 1-Wire 2 Click is a compact add-on board bridging I2C master interfaces with 1-Wire slave devices, ideal for simplifying complex communication protocols. This board features the DS2485, an advanced 1-Wire master with memory from Analog Devices. It features adjustable internal timers for precise 1-Wire signal management, relieving the host processor of timing-sensitive operations, and supports standard and overdrive communication speeds.
[learn more]
Author: MIKROE
Last Updated: 2024-04-26
Package Version: 2.1.0.1
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 10 times
Not followed.
License: MIT license
Download [681.25KB]DIGI IN 2 Click is a compact add-on board designed for converting high-voltage industrial signals into logic-level outputs, ideal for enhancing industrial control systems. This board features the MAX22196, a high-performance octal industrial sink/source digital input IC from Analog Devices. This Click board™ stands out for its ability to interface eight industrial inputs (8V-24V) via SPI, configurable as either sinking or sourcing with built-in current limiters, ensuring adherence to IEC 61131-2 standards.
[learn more] Author: MIKROE
Last Updated: 2024-04-16
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 26 times
Not followed.
License: MIT license
Download [646.43KB]DIGI IN Click is a compact add-board that converts industrial inputs into serialized SPI-compatible output. This board features the MAX22199, an octal industrial digital input from Analog Devices. It stands out for its compliance with the IEC 61131-2 standard, ensuring reliability and efficiency.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Adapter
Downloaded: 25 times
Not followed.
License: MIT license
Download [643.06KB]EasyPull Click is a compact add-on board designed to easily configure mikroBUS™ signals into pull-up or pull-down states, perfect for various applications. It features a universal setup with 4.7kΩ resistors to ensure stable performance across vital communication lines such as SPI, UART, I2C, and standard mikroBUS™ signals (AN, RST, PWM, INT).
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: LIN
Downloaded: 15 times
Not followed.
License: MIT license
Download [516.31KB]MCP2003B Click is a compact add-on board with a physical interface to automotive and industrial LIN systems compliant with the LIN Bus Specification Revision 2.2, SAE J2602, and ISO 17987. This board features the MCP2003B, a LIN transceiver from Microchip. The LIN, which stands for a Local Interconnect Network, is used in conjunction with the CAN interface for communication between the components inside of vehicles. The MCP2003B is a bi-directional half-duplex LIN transceiver that supports baud rates up to 20Kbaud with a LIN-compatible output driver. According to the standard on which this LIN transceiver works, connecting up to 15 peripheral devices to a single controller device is possible.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 19 times
Not followed.
License: MIT license
Download [500.87KB]Expand 16 Click is a compact add-on board with a multi-port I/O expander. This board features the FLX6408, a fully configurable 8-bit GPIO expander from ON Semiconductor. It brings eight independently configurable input/output ports, with a 6mA output drive, when configured in the output mode.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 22 times
Not followed.
License: MIT license
Download [608.75KB]FTDI Click is a compact add-on board that provides a high-speed USB to a serial interface converter. This board features the FT2232H, a 5th-generation high-speed USB 2.0 to a serial UART/I2C/SPI interface converter from FTDI. The entire USB protocol is handled on the chip (FTDI USB drivers required), making this board ideal for various USB applications. Besides a selectable interface and a standalone operation possibility, it also includes an EEPROM which contains the USB configuration descriptors for the FT2232H and one DA converter for additional reference in user-configurable applications.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: 1-Wire
Downloaded: 25 times
Not followed.
License: MIT license
Download [493.51KB]iButton click - is an iButton™ probe Click board™. The iButton is a Analog Devices technology based on Analog's 1-Wire® communication protocol, and a chip usually packed in a robust stainless steel casing. The button-shaped iButton device has two contacts - the lid and the base. These contacts carry the necessary connections down to a sensitive silicone chip, embedded inside the metal button. When the iButton touches the reader probe on the Click board™, it establishes the communication with the host MCU, via the 1-Wire® interface. The communication is almost instant, so it is enough to press the iButton lightly to the probe contacts.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 13 times
Not followed.
License: MIT license
Download [485.76KB]Expand 3 Click is a compact add-on board providing general-purpose I/O expansion. This board features the DS2408, an 8-channel programmable I/O expander from Analog Devices. The DS2408 has a factory-lasered 64-bit registration number, enabling multiple Expand 3 Click boards™ to be connected on the same data line, communicating with the host MCU through a standard Dallas Semiconductor 1-Wire interface (15.3kbps or 100kbps). PIO outputs are configured as open-drain and provide a maximum on-resistance of 100Ω.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.0.0.4
mikroSDK Library: 2.0.0.0
Category: CAN
Downloaded: 32 times
Not followed.
License: MIT license
Download [9.13KB] 
